Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in George West, TX
Gate installation in George West, TX is mostly a rural job. Long driveways off US-281 and US-59 mean the gate sits far from the house and far from power, on pipe posts driven into sandy Live Oak County soil, and it has to handle trucks, trailers, and livestock traffic rather than just a family car. Because the run is long, the post work and the wiring matter as much as the gate itself. We work on gates only, across nine operator brands, and our technicians have up to 10 years of experience. Call (833) 946-7096 for a free estimate.
Why George West Homes Are Different
George West sits at the crossroads of US-281 and US-59, and that crossroads shapes every gate we look at. Live Oak County acreage runs large. Driveways are long, entrances are wide, and a gate here is often the only thing between the road and a house you can’t see from it. That’s a different animal from the short residential driveway gate you’d find in a San Antonio suburb, and it changes what a gate technician actually does on site.
Housing stock tells the same story. Single-family homes sit alongside manufactured homes and rural properties with shops, outbuildings, and fenced pasture, and many of those driveways run hundreds of feet from the road. So gates are frequently hung on pipe posts set into sandy, sometimes calcareous soil, and the posts move. Drought-to-flood swings shift them, hard freezes like the 2021 winter storm work on them, and a gate that was perfectly aligned in spring can be dragging by fall.
Then there’s the sun. Intense summer heat and UV bake gate finishes and operator housings year after year, and Gulf moisture and thunderstorms bring wind that racks lightweight gates on exposed entrances. If you’ve ever wondered why a gate that looks fine from the road won’t close right, this is usually why. The ZIP code 78022 covers a lot of that ground.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main George West Services
Two calls come in more than any other from George West property owners: gates that have broken or drifted out of alignment, and electric systems that have stopped responding. Each has its own page if you want the full detail.
Gate Repair in George West
Gate repair in George West usually starts with a gate that’s sagging, dragging, or no longer latching. On rural Live Oak County entrances that’s often a post issue rather than a gate issue – sandy soil shifts, hinge alignment follows, and a heavy steel pipe farm gate ends up riding on the ground. We look at the whole assembly: hinges, frame, latch, post footing, and the ground the post sits in. For the full breakdown, see Gate Repair in George West.
Electric Gate Repair in George West
Electric gate repair is its own discipline, and we treat it that way. When a gate stops opening, the cause is usually in the motor, control board, safety sensors, or wiring – not the gate panel itself. On long rural drives the wiring run is often the first suspect, and heat-cooked control boards are common in this climate. We diagnose the electrical side properly before recommending any part. Full detail lives on Electric Gate Repair in George West.
Gate Installation in George West
Gate installation in George West is measured, ordered, and scheduled, not same-day work. Because most entrances here are wide and set far back from the road, installation starts with getting the post footing and the power run right before a single panel goes up. We handle Gate Installation from the first on-site measurement through the final operator check, and we work with the equipment you choose rather than steering you toward a brand.
Driveway Gate Installation
Signs you need it
You’re fencing a long driveway off US-281 or US-59, or an old entrance gate has rusted through or stopped being worth repairing.
What it costs in George West
Driveway gate installation typically runs $2,200 to $6,500 depending on span, material, and whether an operator is included, with the written estimate setting the final price.
How we do it
We measure the opening on site, set the posts to proper footing depth in the sandy ground, hang the gate, then align hinges and latch and test the swing through a full cycle.
Automatic Gate Installation
Signs you need it
The gate has to open from a vehicle or the house, and a manual gate means getting out every time – especially where the driveway is too long to walk.
What it costs in George West
Automatic gate installation typically runs $3,500 to $9,000 including the operator, with the written estimate setting the final price.
How we do it
We confirm the gate is hung and swinging free first, mount the operator, run and protect the power and control wiring, install the safety sensors and edges, then program and test every input.
What Gate Installation Costs in George West
| Item | Typical range in George West |
|---|---|
| Driveway gate installation | $2,200 – $6,500 |
| Automatic gate installation | $3,500 – $9,000 |
| Electric gate installation | $3,800 – $9,500 |
Can you install a gate where the driveway is a long way from the house?
Yes. Long rural driveways are the norm in George West, so we plan the power and control wiring run as part of the estimate rather than treating it as an afterthought. Call (833) 946-7096 for an on-site measure – the estimate is free.
Do you handle the power run and the safety edges?
We do. Installation includes the operator wiring, safety sensors, and safety edges, tested before we leave. If the power source itself needs work, we’ll tell you what’s needed so it’s settled before install day.
Brands We Service in George West
We’re experienced with nine gate and operator brands, from residential openers like Ghost Controls, Mighty Mule, and Elite up to commercial-grade DoorKing systems, and we work on the equipment you already have. We don’t claim stocked local parts; ordering is part of the lead time. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in George West, TX
| Service | Typical range in George West |
|---|---|
| Gate repair – hinge, latch, and alignment | $150 – $450 |
| Gate repair – frame and post correction | $250 – $900 |
| Electric gate repair – motor | $300 – $850 |
| Electric gate repair – control board | $280 – $700 |
| Electric gate repair – sensors and safety edges | $180 – $500 |
| Electric gate repair – wiring and power | $200 – $750 |
| Driveway gate installation | $2,200 – $6,500 |
| Automatic gate installation | $3,500 – $9,000 |
| Electric gate installation | $3,800 – $9,500 |
| Operator replacement | $900 – $2,800 |
Two things push price up in George West: span and footing. A wide ranch entrance needs heavier posts set deeper in shifting sandy soil, and a long wiring run off US-59 adds labor that a short residential driveway never sees. Whatever the job, we quote a price and agree it with you before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in George West
We cover George West and the rural acreage around it, including entrances along the US-281 and US-59 corridors and the pasture and ranch properties between them. Response timing depends on where the property sits and how far back the gate is from the road, so we’ll confirm it when you call. Areas we regularly work in include:
- Downtown George West and the streets around the courthouse square
- Ranch and acreage properties along US-281
- Rural entrances off US-59
- Properties in and around the 78022 ZIP code
- Outlying Live Oak County acreage with long driveways and fenced pasture
Service Area – Cities Near George West
George West anchors a wide rural area, and we work the surrounding towns as well. If you’re outside the city, we also cover Cotulla, TX, Dilley, TX, Pearsall, TX, and Encinal, TX. Most of these are ranch-country properties with the same long-driveway and post-footing issues we see in George West, so the approach carries over. Tell us where the gate is and what’s happening with it, and we’ll confirm coverage and timing.
Serving George West, TX – Our Local Coverage Area
We serve George West and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in George West
We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. Timing depends on where the property sits and how far back the gate is from the road. Call (833) 946-7096 and we’ll give you a realistic window.
That depends on the gate, the power connection, and where it sits on the property, so ask the city about permits before you build. For an on-site estimate, call (833) 946-7096 – it’s free.
Yes. Much of our George West work is on rural acreage and ranch entrances outside the city limits, including properties along US-281 and US-59. Call (833) 946-7096 with the address and we’ll confirm coverage.
If your gate is broken, sagging, or missing entirely, call (833) 946-7096 for a free estimate. We’ll look at the gate, the posts, and the power side, tell you what it actually needs, and quote the price before any work starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What George West Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Rashad Robinson"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Shannon Kowalski"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Steve Reed