Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Zapata, TX
Gate installation in Zapata starts with a conversation about ground, not about gate style. The lots here are wide, the driveways are long, and the soil under them is caliche that behaves differently in a wet spring than in a dry August. We’re a gate-only company, which means the crew that measures your opening is the same crew that sets your posts and wires your operator. If you’re planning a new driveway gate on a ranchito off US-83, or replacing a tired pipe gate at the front of a single-story ranch home, call (833) 946-7096 and we’ll take a look.
Why Zapata Homes Are Different
Zapata sits on caliche and caliche-derived soils. That one fact shapes almost every gate job in town. Caliche goes rock-hard in a drought and then moves after a heavy Rio Grande storm, and gate posts set in it shift with it. A gate that swings clean in March can be dragging the ground by fall. That’s why post-setting and bracing matter more here than the gate itself, and why we spend more time on footings in Zapata than we would on a clay lot in Laredo.
The housing stock pushes the same direction. Zapata is mostly single-story ranch homes, manufactured homes, and rural ranchito parcels with detached outbuildings and long private driveways. That means long-span driveway gates, livestock pens, and welded pipe-and-mesh fencing rather than decorative suburban gate packages. Add intense UV and long dry spells, and you get steel gates that fade and rust at the welds, plus sun-baked wood and vinyl that warps and sags. Repairs in Zapata skew toward re-setting posts in caliche, re-welding sun-weathered steel, and leveling sagging double-drive gates.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Zapata Services
Two jobs come up more than any other when Zapata property owners call: an existing gate that needs mechanical or electrical repair, and a brand-new gate for a driveway or parcel that never had one.
Gate Repair in Zapata
Most of the mechanical work we do in Zapata comes down to alignment and steel. Caliche moves, posts lean, hinges twist, and a gate that was square last season starts dragging or binding halfway through its swing. We re-set posts to proper footing depth, re-weld weathered pipe and steel at the joints, brace sagging double-drive gates, and true up hardware so the gate travels the way it should. When you need gate repair on a ranch-style pipe gate or a long driveway span, the fix usually starts underground. We diagnose the whole system before quoting, and the price is agreed in writing before any work starts.
Electric Gate Repair in Zapata
Automated gates here face a specific grind: sun-baked control boxes, wiring that’s taken years of UV, and posts that have crept out of plumb enough to bind an otherwise healthy operator. Electric gate repair is a core service for us, not an add-on. We test the motor, the control board, the safety sensors, and the wiring run as one system, so you’re not paying someone to swap a board when the real problem is a misaligned post loading the motor. We work on Ghost Controls, DoorKing, Elite, Mighty Mule and the other makes we know. For electric gate repair in Zapata, we quote before we touch anything.
Gate Installation in Zapata
New gate work in Zapata is mostly about matching the gate to the ground and the parcel. Long private driveways off US-83 and the county roads call for wide spans, and a wide span on moving caliche needs deeper footings and better bracing than a narrow ornamental gate on a suburban lot. The heat adds a second layer: steel fades and rusts at the welds, wood and vinyl warp, so material choice and finish matter as much as the operator. Our Gate Installation work covers the whole job, from measuring the opening to setting posts to commissioning the operator. We plan, order, and schedule this work, and we hand you a written price before anything is ordered.
Driveway Gate Installation
Signs you need it
You’re fencing a long private driveway on a ranchito and the opening has never had a gate, or the old pipe gate has rusted through at the hinges and there’s nothing solid left to repair.
What it costs in Zapata
A typical driveway gate installation in Zapata runs about $2,500 to $7,500 depending on span, material, and whether an operator is included, with the written estimate setting the final price.
How we do it
We measure the opening and check the ground, set the posts to proper footing depth in the caliche, hang and brace the gate leaves, then test the swing and latch before we call it done.
Electric Gate Installation
Signs you need it
Your gate is manual and you’re tired of getting out of the truck at the end of a long driveway every time, or you want an existing gate automated with a new operator.
What it costs in Zapata
Automating a gate in Zapata typically lands between about $1,200 and $3,500 for the operator and installation, and a full new gate with an operator runs roughly $4,000 to $9,500, with the written estimate setting the final price.
How we do it
We mount the operator to the gate and post, run the power and control wiring, set the opening and closing limits, install and test the safety sensors, then walk you through the remote and keypad.
What Gate Installation Costs in Zapata
| Item | Typical range in Zapata |
|---|---|
| Driveway gate installation (gate only) | $2,500 – $7,500 |
| Electric operator and automation | $1,200 – $3,500 |
| New gate with operator installed | $4,000 – $9,500 |
Do I need a permit for a gate in Zapata?
Gate permits vary by property and how the gate sits near a road or easement. Ask the City of Zapata or the county about your specific parcel before we order materials, and we’ll build the schedule around what they require.
Can you automate an existing gate at my Zapata property?
Usually yes, if the gate itself is sound and the posts are plumb. We inspect the gate, hinges, and footing first; if the gate is binding or the posts have shifted, we fix that before adding an operator.
Brands We Service in Zapata
We work on your brand, not just ours. Our technicians know Ghost Controls and Mighty Mule for residential driveways, and DoorKing and Elite for heavier access systems, along with LiftMaster, FAAC, BFT, Linear, and Viking. We don’t claim to stock parts, so turnaround depends on the part, but we diagnose fast because we’ve seen these systems before. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Zapata, TX
| Service | Typical range in Zapata |
|---|---|
| Gate repair (mechanical, alignment, welding) | $150 – $600 |
| Post re-setting and bracing | $250 – $900 |
| Electric gate repair (motor, board, sensor, wiring) | $200 – $850 |
| Control board or motor replacement | $350 – $1,200 |
| Safety sensor and wiring repair | $150 – $500 |
| Driveway gate installation (gate only) | $2,500 – $7,500 |
| Electric operator and automation | $1,200 – $3,500 |
| New gate with operator installed | $4,000 – $9,500 |
Price in Zapata climbs with span, material, and ground conditions: a long double-drive gate set in stubborn caliche needs deeper footings and more bracing than a short single leaf, and commercial-grade operators cost more than residential ones. Every job is quoted per job, the price is agreed in writing before any work starts, and the written estimate sets the final price. No surprises on the invoice.
Neighborhoods We Serve in Zapata
We cover Zapata and the surrounding ranchito country, including parcels along US-83 and the county roads, plus the town core around ZIP 78076. Long private driveways and rural lots don’t slow us down; they’re most of what we see out here. One note on timing: dispatch runs Sunday through Friday, 7am to 7pm, and we’re closed Saturday, so a Friday call gets booked into the next opening. If you’re outside the town core, tell us the nearest crossroad when you call and we’ll route the visit.
- Town core around ZIP 78076
- Ranchito parcels off US-83
- County road properties south of town
- Rio Grande frontage lots
Service Area – Cities Near Zapata
Zapata is our home base for this stretch of the Rio Grande, and we also cover the towns around it. If you’re in Medina, TX or down the river in San Ygnacio, TX, we make the trip. We also handle gate work for property owners in Mesquite, TX and across the larger market in Laredo, TX. Call (833) 946-7096 and we’ll confirm coverage for your address before we schedule.
Serving Zapata, TX – Our Local Coverage Area
We serve Zapata and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Zapata
We answer 24/7, and dispatch runs Sunday through Friday, 7am to 7pm. Repairs within the Zapata area are typically same-day or next opening. Installation work is measured and scheduled, so we’ll set a date once we’ve seen the site and quoted the job.
The property owner handles permit applications and HOA approval; we’ll tell you what the city or county typically asks for and build our install schedule around your approval. We don’t file on your behalf, but we’ll work with whatever timeline you’re given.
We serve Zapata and the ranchito parcels around it, plus Medina, San Ygnacio, Mesquite, and Laredo. If you’re not sure whether your address falls inside our range, call (833) 946-7096 and we’ll check before booking a visit.
Whether you’re installing a new driveway gate on a caliche lot, automating an existing gate, or chasing down an electric fault in an operator that’s seen too many summers, we’re the gate specialist to call. We work on your brand, we diagnose before we quote, and the price is agreed in writing before any work starts. Call (833) 946-7096 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Zapata Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Rashad Robinson"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Shannon Kowalski"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Steve Reed