Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pearsall, TX
If you need a new gate on a Pearsall property, the job usually starts with the ground rather than the gate: welded pipe posts set into expansive clay, a long run of fence line to tie into, and a driveway or ranch entrance that has to keep working through heat, dust and heavy rain. We install swing, slide and automatic gates for homes, ranches and small commercial entries, and we work on the equipment already there when a repair makes more sense than a replacement. Call (833) 946-7096 for a free on-site estimate.
Why Pearsall Homes Are Different
Pearsall sits in Frio County, in the middle of South Texas ranch and oilfield country. That changes what a gate job looks like here. In town, older single-family homes and a steady mix of manufactured homes sit behind chain-link or ornamental steel fences, and the gate is usually a driveway swing or slide rather than an elaborate automated entry. Out on the surrounding ranch land, welded pipe-and-tube entry gates and cattle pens are the norm, many of them installed decades ago and now sagging at the hinge.
The climate does its own damage. Long hot summers and intense UV break down steel hardware, welds and galvanized coatings faster than in most of the state, and the drought-then-downpour pattern works the clay soils underneath. That clay heaves when it’s wet and settles when it dries, and it pulls gate posts out of plumb. The classic Pearsall call is a ranch entry gate a mile off the highway whose pipe posts have leaned after a dry spell, so the gate drags the ground and won’t latch. The fix is resetting and re-concreting the posts, not just adjusting the hinge.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Pearsall Services
Two jobs come up more than any other on Pearsall properties: getting a gate that has gone out of line or stopped moving back into service, and tracking down what failed inside an automated system.
Gate Repair in Pearsall
Most of the mechanical work here is about steel that has moved rather than steel that has broken. Sagging hinges, gates that drag the ground, latches that miss because a post has leaned with the clay, and rusted weld joints on older pipe gates are the routine calls. We reset posts, re-hang panels, repair frames and replace tired hardware so the gate swings and latches the way it should. If your gate needs mechanical work, start with Gate Repair in Pearsall.
Electric Gate Repair in Pearsall
When a gate has an operator, the failure is often electrical rather than mechanical. Motors that hum without moving, control boards that have taken on water, safety sensors knocked out of alignment by a shifted post, and wiring chewed or corroded after years in the sun all land on our schedule. We diagnose the whole system – motor, board, sensors and power – instead of guessing at parts. For automated systems, see Electric Gate Repair in Pearsall.
Gate Installation in Pearsall
New gate installation in Pearsall usually comes down to two situations: an older in-town lot behind chain-link or ornamental steel where the existing driveway gate has reached the end of its life, and a rural tract that needs a proper entry gate where there’s only a cattle guard or an open fence line. Both come with the same underlying challenge – posts that have to stay plumb in clay that moves with every wet and dry cycle, and steel that has to hold up to long summers of UV and dust. We measure the opening, check the fence line and the ground, and quote the work before anything is ordered.
Driveway Gate Installation
Signs you need it
The existing driveway gate is rusted through at the frame, drags the ground no matter how the hinge is adjusted, or the opening is too narrow for the vehicles that actually use it.
What it costs in Pearsall
A new driveway gate typically runs $1,800 to $5,500 installed, and adding an operator usually lands the whole job between $3,500 and $9,000.
How we do it
We set new posts to proper footing depth in concrete, hang the panel square to the opening, fit the hardware and latch, then walk the swing or slide through its full travel before we call it finished.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open a gate on a rural tract, or the old operator has failed and the gate itself is still sound enough to carry a new one.
What it costs in Pearsall
Automating an existing gate typically costs $1,200 to $3,500 for the operator and installation, while a full new automatic gate system runs about $3,500 to $9,000.
How we do it
We confirm the gate panel and posts can carry an operator, mount the unit, run the power and control wiring, set the safety sensors and travel limits, then test the full open-and-close cycle.
What Gate Installation Costs in Pearsall
| Item | Typical range in Pearsall |
|---|---|
| New driveway gate, installed | $1,800 – $5,500 |
| Operator added to an existing gate | $1,200 – $3,500 |
| Full automatic gate system, installed | $3,500 – $9,000 |
Can you install a gate on a rural Pearsall property off a caliche road?
Yes. Rural installs are routine here, and the main work is setting pipe posts to proper footing depth so the clay can’t pull them out of line. We check access and the fence line during the free on-site estimate.
Do I need a permit to install a gate in Pearsall?
Most cities require a permit for a new gate or fence line, and rules vary by property and location. Ask the City of Pearsall about your address before work starts, and we’ll quote the installation around what’s approved.
Brands We Service in Pearsall
We work on the brands Pearsall properties actually have: DoorKing and Elite on heavier commercial and entry systems, LiftMaster on residential operators, and Mighty Mule on smaller driveway setups. See our brands for the full list. Because we know these systems, diagnosis is quicker and we don’t push a brand switch you don’t need.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pearsall, TX
| Service | Typical range in Pearsall |
|---|---|
| New driveway gate, installed | $1,800 – $5,500 |
| Operator added to an existing gate | $1,200 – $3,500 |
| Full automatic gate system, installed | $3,500 – $9,000 |
| Gate repair, mechanical (hinges, posts, latches) | $150 – $600 |
| Gate post reset and re-concrete | $250 – $750 |
| Electric gate repair (motor, board, sensors) | $200 – $800 |
| Safety sensor or wiring repair | $150 – $450 |
In Pearsall, price goes up with the size of the opening, how far the posts have to be reset, and whether power has to be run out to a rural gate location. Every job is quoted in writing before we start, and that written estimate sets the final price.
Neighborhoods We Serve in Pearsall
We cover in-town Pearsall and the rural tracts around it, including properties off the highway corridors and the ranch roads outside the city limits. For most addresses in and around Pearsall, we can schedule a visit with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 946-7096 and we’ll book the next opening that works for you.
- Central Pearsall, ZIP 78061
- North Pearsall along the highway frontage
- South Pearsall toward the ranch roads
- Rural tracts in Frio County outside town
- Small commercial entries along the main corridors
Service Area – Cities Near Pearsall
Pearsall is our focus on this page, but we also take gate work in the towns around it. If you’re outside the city limits, we cover Dilley, TX, Cotulla, TX, Encinal, TX and George West, TX. Ranch and rural properties in these areas get the same treatment: posts set to proper depth, hardware built for the heat, and a written quote before we start.
Serving Pearsall, TX – Our Local Coverage Area
We serve Pearsall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pearsall
We schedule Pearsall visits with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service is often possible. Call (833) 946-7096 and we’ll book the earliest opening. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We don’t pull permits for you, but we’ll tell you what to ask the City of Pearsall about your address, and we build to whatever your HOA or property rules require. Get the approval in place before install day and the work moves faster.
Yes. A large share of the gate work around Pearsall is on rural tracts in Frio County, including ranch entries and cattle pens set well off the highway. We check access and footing conditions during the free on-site estimate.
If a gate on your Pearsall property is sagging, stuck or missing altogether, call (833) 946-7096 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Pearsall Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Rashad Robinson"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Shannon Kowalski"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Steve Reed